Product

Summary of BHDQ large dip angle belt conveyor:

Structure of BHDQ large dip angle belt conveyor: the retractile corrugated rubber rib is pasted on two sides of flat belt vertically, between two ribs there are many diaphragm plates pasted to form lock hoppers, materials will fed into these hoppers for transporting constantly. This kind of belt conveyor is widely used in coal, grain, building, chemical, hydropower and metallurgy. It is suitable for transporting the bulk materials whose temperature is in range of -15℃ to +40℃, bulk density is 0.5-2.5t/m3. If transport the materials with high-temperature, including acid, alkaline, greasy and other organic solvent, the special sidewall belt conveyor will be needed, inclined angle is in the range of 0°~90°.

Arrangement of BHDQ large dip angle belt conveyor:

The conveyor adopts “Z” shaped arrangement in order to get good receiving and discharging effect. It includes upper horizontal section, lower horizontal section and declining section. It receives materials at lower horizontal section and discharge at upper horizontal section. Upper horizontal section is connected with declining section by the convex curve frame, lower horizontal section is connected with declining section by concave curve frame to realize smooth transition of the belt.

  Upper horizontal section: in order to adapt different discharging height, head frame is divided into three types, low-type head frame( height H0=1000mm), medium-type head frame(height H0=1100~1500mm) and high-type head frame( height H0=1600~2000mm). Arrange at upper horizontal section accordingly low-type convex curve frame and low-type mid-frame support leg ( suitable for height of head frame H0=1000mm), medium-type convex curve frame and medium-type mid-frame support leg ( suitable for height of head frame H0=1100mm~1500mm), high-type convex curve frame and high-type mid-frame support leg ( suitable for height of head frame H0=1600mm~2000mm).
 Declining section: No matter what kind of support leg the upper horizontal section will use, low-type, medium-type or high-type, declining section will use low-type mid-frame support leg. If inclined angle of the belt conveyorβ≥45°, low-type mid-frame support leg is recommended.
 Lower horizontal section adopts low-type mid-frame support leg.

Characteristics of BHDQ-type large dip angle belt conveyor:

 Space saving, investment saving;

 Large capacity, good popularity;

 Inclined angle: 0°----90°

 Maintenance is easy, rollers are same to ones used on ordinary belt conveyor.

 Application range:Metallurgy, mining, dock, environment protection, food, chemical and building materials.


Structure profile of BHDQ-type large dip angle belt conveyor

Copyright(c) 2009-2010 Tangshan Beihua Electro-Mechanical Engineering Co.,ltd   Address:C-416,East Intemational Building,No.152 Jianshe North Road Tangshan,Hebei,P,R,China
  FAX:+86-0315-3859329 TEL:+86-13931528222   E-mall:info@beihua.com.cn
icp:05016704  点击这里给我发消息